Press Esc to close

Europe's Largest Stockists of New and Used Professional Audio Equipment

Dreadbox Erebus Synthsiser V2

Dreadbox Erebus Synthsiser V2 - Top

Dreadbox Erebus Analog Paraphonic Mini Synthesiser V2

Dreadbox Erebus Synthsiser V2

Analog Paraphonic Synthesizer V2

  • Analog 2-voice Paraphony or Unison sounds, only with Through Hole components
  • 2 x VCO with separate glide controls
  • 2 pole (12dB/ocv) pre-fed resonating VC Low Pass Filter
  • VC LFO with additional VC Depth
  • 2 x Envelope Generators (1xADSR and 1xAR dedicated to the AMP)
  • VC Delay/Echo
  • 15 patches for an astonishing Modular experience
    CV Outputs: LFO, Envelope (attenuated), Modulation Wheel (attenuated), Gate, Osc1 pitch (1V/ocv), Osc2 pitch (1V/ocv)
  • CV Inputs: Osc1, Osc2, Echo time, VCF, CV, GATE, LFO rate, PW , VCA
  • Paraphony CV/GATE outputs allows you to turn monophonic devices into Paraphonic, or even combine 2 monosynths into a paraphony orgy.

Differences between V1 and V2

  • Enclosure’s shape is slightly changed to a perfect rectangular
  • LFO Depth patch changed to PW
  • RES patch that had the ability to control either the resonance or the VCA is now only dedicated to VCA

Everything else is EXACTLY the same. Nothing has been changed in the schematic, the quality or the overall sound. If you compare V1 with V2 they sound EXACTLY THE SAME

Dreadbox Erebus Specifications

Works only with 12V AC 1A power supply 2,5mm center pin

MIDI interface: Midi in/through DIN socket, Pitch note/gate on-off, retrigger function (on-board), Mod wheel (patched on-board), Pitch wheel, MIDI Channel select 1-7 or Omni (DIP switch)

MONO AUDIO IN (1/4″ TS-Unbalanced), accepts up to 3Vpp inputs

MONO AUDIO OUT (1/4″ TS-Unbalanced), sends up to 10Vpp o

Patches: 3.5mm mono

Gate in: activation at 0.9V in a low gain up to 5V for max gain

Gate out: 0-5V

Osc1, Osc2, CV IN: works at 1V/oct and can accept from +/-12V

CV1, CV2 outs: send 1V/oct (converted to analog via midi keyboard)

Mod Wheel out: converts the midi modulation wheel to analog 0-5V out

Envelope out: 0-6.6V depending on the depth setting

LFO out: +/-5V

LFO frequency range: 0.009Hz (110sec) up to 30Hz (0.033sec)

LFO rate CV in: 0-5V

PW in: +/-5V

Echo CV in: 0-5V (works best up to 2.5V)

VCA in: 0-5V

Suggested room temperature for best oscillator stability: 18-30 Celcius

Weight: 1.4 kgr

225 x 160 x 55 mm

Share This: