Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

Neve 1084 Mono Mic pre and 3 Band EQ Module

Neve 1084 mic pre and EQ module front

The Neve 1084 microphone preamp and equaliser is based on the Neve 1073 but with a slightly different pallette of frequency selections, with a 3 band EQ, selectable high frequency and Lo pass filter and a "Q" switch allowing users to switch between wide and narrow Q-types.

Neve Neve 1084 Mono Mic pre and 3 Band EQ Module

Based on the same technology as the 1073, the 1084 deliver the unique Neve sound. Originally fitted to the A1085 custom console built for Whitney Studios in Los Angeles. The1084s offer additional features including 3 switchable EQ bands with cut and boost, a high Q for presence and low pass/high pass filters. Neve Channel Amplifiers are designed to accept signals from microphone and line sources. Low noise and distortion and generous overload performance are important features of these amplifiers. These modules are the same as the original designs and contain all of the original components. These very popular sounding mic pre’s are considered by many to capture the very essence of the legendary Neve sound.

Features:
  • Modular rack design
  • Classic transformer mic amp
  • Choice of "standard" or "Air Studio" modules
  • 3 switchable EQ bands
  • Hand crafted to original 1970 design
  • HP and LP filters
  • High Q setting
  • Both inputs are transformer balanced and earth free.

Neve 1084 Specifications

Mic Amplifier

  • Microphone Input: Input impedance 300 Ohms or 1200 Ohms, gain +80dB to +20dB in 5dB steps.Input is transformer balanced and earth free.
  • Line Input: Input impedance 10K Ohms bridging, gain +20dB to -10dB in 5dB steps.Input is transformer balanced and earth free.
  • Output: Maximum output is >+26dBu into 600 Ohms. Output impedance is 75 Ohms @ 1kHzOutput is transformer balanced and earth free.
  • Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output (80kHz bandwidth) into 600 Ohms
  • Frequency Response: +/-0.5dB 20Hz to 20kHz, -3dB at 40kHz, EQ out.
  • Noise: Not more than -83dBu at all Line gain settings, EQ In/Out (22Hz to 22kHz bandwidth)
  • EIN: Better than -125dBu @ 60dB gain.

EQ:

  • High Frequency: Smooth +/- 16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz
  • Mid Frequency: Smooth +/- 12dB or +/- 18dB peaking with switchable 'High Q', selectable centre frequencies of 0.35kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
  • Low Frequency: Smooth +/- 16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz and 220Hz
  • High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz
  • Low Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz & 18kHz
  • EQL Button: Switches the equaliser in or out of circuit.
  • Phase Button: Gives 180 degree phase change at balanced output

Module Dimensions:

  • Width: 45mm (1.8 inches)
  • Height: 222mm (8.75 inches)
  • Depth: 254mm (10 inches)
  • Approx. Weight: 2.5kg (5.5 pounds)
Recently Viewed
  • Neve 1081 Mono Micpre & 4 Band EQ Module
Recently Viewed
Share This: