Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

BAE 1084 Mic Pre / EQ Pair with PSU

BAE 1084 Mic Pre / EQ Pair with PSU - Front

Introducing the vintage neve style BAE 1084 Mic Pre / EQ Pair with PSU. The BAE 1084 is authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.

BAE 1084 Mic Pre / EQ Pair with PSU

The BAE 1084 Mic Pre / EQ Pair with PSU preamp yields a really fat sound. It seems to add subharmonics to the low end which makes the bottom end sound huge. It smooths the top end which gives the highs a silky sheen. As well the BAE 1084 Mic Pre / EQ Pair with PSU compresses transients a little bit. It is a smooth, fat., larger than life sound. An added bonus is to use the DI inputs to fatten samples, synths and mixes since the DI can handle line levels.

The BAE 1084 Mic Pre / EQ Pair with PSU equalizer is very broad banded and musical. It has a hi-pass filter with four frequencies- 45Hz, 70Hz, 160Hz and 360Hz. It has a lo-pass filter with five frequencies- 6kHz, 8kHz, 10kHz, 14kHz and 18kHz. The low end of this equalizer is so tight that you can boost 220Hz and not muddy up the sound. The mid band has six frequencies- 350Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz and 7.2kHz. As well, the BAE 1084 has a "Hi-Q" button on the mid band for narrower bandwidth. The high band is shelving and is selectable with three frequencies- 10kHz, 12kHz and 16kHz. It is smooth and silky and a little goes a long way.

Features of the BAE 1084 Mic Pre / EQ Pair with PSU

  • Made from an authentic reproduction of a Neve™* BAE 1084 module
  • Hi-Z direct inputs on the front panel
  • 48v phantom power on the front panel
  • Balanced mic input, line input and balanced +4 output from XLR connectors on the rear of the module
  • One-year warranty
  • Output level control functions as fader when going straight to tape
  • Modules are mounted horizontally and take up only one rack unit each
  • Oversize power supply provides four times the current needed for optimum sound quality
  • Ten-day satisfaction guarantee

BAE 1084 Mic Pre / EQ Pair with PSU Specifications

Frequency Response

  • 10Hz to -3dB at 55kHz

3 Band Equaliser

  • HF:+/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz

High Pass Filter

  • 50Hz, 80Hz, 160Hz & 300Hz

Low Pass Filter

  • 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz

Mic Input Impedance

  • ≈1200/300 ohms

Line Input Impedance

  • 10k ohms
  • ≈150k ohms
  • Output Impedance

    • 65 ohms

    Common Mode Rejection Ratio

    • 100dB min @ 60Hz

    Maximum Output Level

    • +27.4 dBu @ 600Ω

    Power Requirements

    • 115/230 VAC, 28W

    Gain dB

    • 0 to 80 dB

    Equivalent Input Noise

    • -110 dBu; Unweighted 300kHz Bandwidth

    Weight (Module/Rackmount)

    • 6 LBS/2.72 KG
    • 10 LBS/4.54 KG

    Dimensions in Inches (Module/Rackmount)

    • 45 mm W x 8.75 inches H x 10.5 inches D
    • 19W x 1.75L x 9D
    Share This: