Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

BAE 1073 Mic Pre / EQ Pair with PSU

BAE 1073 Mic Pre / EQ Pair with PSU - Front

BAE 1073 Mic Pre / EQ Pair with PSU that yields that fat sound that you so crave. This mic pre / EQ features the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire, making the BAE 1073 as authentic as you can get

BAE 1073 Mic Pre / EQ Pair with PSU

The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.

The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.

Features of the BAE 1073 Mic Pre / EQ Pair with PSU

  • High Frequency: +/-16dB fixed frequency shelving at 12kHz
  • Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • Mid Range: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
  • High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

BAE 1073 Mic Pre / EQ Pair with PSU Specifications

Frequency Response

  • 10Hz to -3dB at 55kHzM

3 Band Equaliser

  • HF: +/-16dB fixed frequency shelving at 12kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz

High Pass Filter

  • 50Hz, 80Hz, 160Hz & 300Hz

Mic Input Impedance

  • ≈1200/300 ohms

Line Input Impedance

  • 10k ohms
  • DI Input Impedance

    • ≈150k ohms

    Output Impedance

    • 35 ohms

    Common Mode Rejection Ratio

    • 100dB min @ 60Hz

    Maximum Output Level

    • +27.4 dBu @ 600Ω

    Power Requirements

    • 115/230 VAC, 28W

    Gain dB

    • 0 to 80 dB

    Equivalent Input Noise

    • -110 dBu; Unweighted 300kHz Bandwidth

    Weight (Single/Dual)

    • 6 LBS / 2.72 KG
    • 10 LBS / 4.54 KG

    Dimensions in Inches (Module/Rackmount)

    • 45 mm W x 8.75 inches H x 10.5 inches D
    • 19W x 1.75L x 9D
  • Share This: