Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

BAE 1066D Mic Pre / EQ Pair with PSU

BAE 1066D Mic Pre / EQ Pair with PSU - Front

This BAE 1066D Mic Pre / EQ Pair with PSU is based on the BAE 1073, but with different frequencies. The original BAE 1066 only had a 10k shelving but this unit offers much more!

BAE 1066D Mic Pre / EQ Pair with PSU

The 1066D is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet. This unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.

Features of the BAE 1066D Mic Pre / EQ Pair with PSU

  • High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.
  • Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz &220Hz.
  • Mid Range: +/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz
  • High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz.
  • EQ Button: Switches the equaliser on or off
  • Phase Button: 180°

BAE 1066D Mic Pre / EQ Pair with PSU Specifications

Frequency Response

  • 10Hz to -3dB at 55kHz

3 Band Equaliser

  • HF:+/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz

High Pass Filter

  • 45Hz, 70Hz, 160Hz & 360Hz

Mic Input Impedance

  • ≈1200/300 ohms

Line Input Impedance

  • 10k ohms

DI Input Impedance

  • ≈150k ohms

Output Impedance

  • 65 ohms

Common Mode Rejection Ratio

  • 100dB min @ 60Hz
  • Maximum Output Level

    • +27.4 dBu @ 600Ω
    • Power Requirements

      • 115/230 VAC, 28W

      Gain dB

      • 0 to 80 dB

      Equivalent Input Noise

      • -110 dBu; Unweighted 300kHz Bandwidth

      Weight (Module/Rackmount)

      • 6 LBS / 2.72 KG
      • 10 LBS / 4.54 KG

      Dimensions in Inches (Module/Rackmount)

      • 45 mm W x 8.75 inches H x 10.5 inches D
      • 19W x 1.75L x 9D
Share This: