Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

BAE 1028 Mic Pre and EQ Pair with PSU

BAE 1028 Mic Pre and EQ Pair with PSU - Front

The handwiredBAE 1028 Mic Pre and EQ Pair with PSU features a three-band with HPF and packs more than the legendary 1073. BAE 1028 also includes the same Low pass filter found on the 1084 module.

BAE 1028 Mic Pre and EQ Pair with PSU

The BAE 1028 is a mic preamp with 3-band EQ inspired by the legendary 1073 with extensive additional frequencies.

The BAE 1028 Mic Pre and EQ (Pair) uses the exact same mic and line preamp as the 1073 with Carnhill (St Ives) Transformers to give the true vintage tone associated with this legendary preamp.

In addition the 1028 features no less than 28 frequencies including the same Low pass filter found on the 1084 module. The additional frequencies are located in the mid-bell and high shelf bands with frequencies selected to allow for greater flexibility with the mid bell able to play against the low and high shelves for rich, flexible and musical tonal shaping capabilities. 

Features of the BAE 1028 Mic Pre and EQ Pair with PSU
  • Inspired by the legendary 1073
  • Class A transformer-coupled
  • Hand-wired, all-discrete using modular cards
  • Three-band with HPF
  • 28 total frequency points with mid band overlapping
  • Extended selection for high frequency shelving
  • High quality Swiss-made Elma® rotary switches

BAE 1028 Mic Pre and EQ Pair with PSU Specifcations

Frequency Response

  • 10Hz to -3dB at 55kHz

3 Band Equaliser

  • HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz

High Pass Filter

  • 45Hz, 70Hz, 160Hz & 360Hz

Low Pass Filter

  • 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz

Mic Input Impedance

  • ≈1200/300 ohms

Line Input Impedance

  • 10k ohms

DI Input Impedance

  • ≈150k ohms

Output Impedance

  • 65 ohms

Common Mode Rejection Ratio

  • 100dB min @ 60Hz

Maximum Output Level

  • +27.4 dBu @ 600Ω

Power Requirements

  • 115/230 VAC, 28W

Gain dB

  • 0 to 80 dB

Equivalent Input Noise

  • -110 dBu; Unweighted 300kHz Bandwidth

Weight (Module/Rackmount)

  • 6 LBS / 2.72 KG
  • 10 / 4.54 KG

Dimensions in Inches (Module/Rackmount)

  • 1.75W x 8.75L x 7.75D
  • 19W x 1.75L x 9D
Share This: