Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

BAE 1023 Single Channel Mic Pre and EQ

BAE 1023 Single Channel Mic Pre and EQ - Front

The BAE 1023 Single Channel Mic Pre and EQ has the exact same mic/line preamp as the BAE 1073, but with significantly more frequencies in the mid and hi sections! BAE 1023 10-series module based on the famous 1073. It is totally handwired using the same Carnhill (St. Ives) transformers as the vintage modules.

£2,815.00 ex VAT £3,378.00 inc VAT

* Required Fields

£2,815.00 ex VAT £3,378.00 inc VAT

Availability: Usually 1-3 working days

BAE 1023 Single Channel Mic Pre and EQ

The BAE 1023 is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.

Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.

Features BAE 1023 Single Channel Mic Pre and EQ

  • High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.
  • Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz.
  • Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.
  • High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz.
  • EQ Button: Switches the equaliser on or off
  • Phase Button: 180°

* Please note that this unit requires a BAE 24V PSU to operate.

The power supply can run 2 units simultaneously thats why units are sold separately as well.
Please choose the correct option when adding to the cart.

BAE 1023 Single Channel Mic Pre and EQ Specifications

Frequency Response

  • 10Hz to -3dB at 55kHz

3 Band Equaliser

  • HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
  • LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz
  • High Pass Filter

    • 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

    Mic Input Impedance

    • ≈1200/300 ohms

    Line Input Impedance

    • 10k ohms

    DI Input Impedance

    • ≈150k ohms

    Output Impedance

    • 65 ohms

    Common Mode Rejection Ratio

    • 100dB min @ 60Hz

    Maximum Output Level

    • +27.4 dBu @ 600Ω

    Power Requirements

    • 115/230 VAC, 28W

    Gain dB

    • 0 to 80 dB

    Equivalent Input Noise

    • -110 dBu; Unweighted 300kHz Bandwidth

    Weight (Module/Rackmount)

    • 6 LBS/2.72 KG 10 LBS/4.54 KG

    Dimensions in Inches (Module/Rackmount)

    • 45 mm W x 8.75 inches H x 10.5 inches D 19W x 1.75L x 9D