Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

SSL X-Rack VHD I/P Module

SSL XR627 X-Rack VHD I/P Module For X-Rack/Mynx

SSL XR627 X-Rack VHD I/P Module for X-Rack or Mynx.The SSL XR627 delivers overdrive characteristics.

£618.56 ex VAT £742.27 inc VAT

UK List Price: £649.17 ex VAT

UK List Price: £779.00 inc VAT

Availability: Usually 1-3 working days

SSL XR627 X-Rack VHD I/P Module

The devilishly warm and dirty alternative to the pure Mic Amp Module. A front end that combines classic SSL character with our new Variable Harmonic Drive circuit, delivering a time machine of overdrive characteristics.

Features

  • Electronically balanced ultra-high bandwidth Mic input with +20dB to +70dB gain control
  • Hi-Z and Pad Switches on Mic Amp Input
  • Dedicated Additional XLR Line Input
  • Variable Harmonic Drive circuit adds a controllable blend of 2nd or 3rd Harmonic distortion
  • Dedicated Trim control after the VHD stage
  • Classic Listen Mic Compressor with fixed attack and release curves… ideal for drums
  • High and Low-Pass Filters

SSL XR627 Specifications

Physical *

  • Depth
  • 200mm / 7.9 inches including front panel knobs, excluding connectors
  • 275mm / 10.9 inches including front panel knobs and connectors
  • Height 171mm / 6.75 inches
  • Width
  • 35mm / 1.4 inches front/rear panels
  • 49mm / 1.9 inches overall width (front and rear panels are offset)
  • Weight 260g / 9.5 ounces
  • Boxed size 190mm x 290mm x 70mm / 7.5" x 11.5" x 2.5"
  • Boxed weight 460g / 16.5 ounces

* All values are approximate

  • Environmental

    • Temperature
    • Operating: +5 to 30 deg. C
    • Non-operating: –20 to 50 deg. C
    • Max. gradient: 15 deg. C/hour
    • Relative Humidity
    • Operating: 20 to 80 %
    • Non-operating: 5 to 90 %
    • Max. wet bulb: 29 deg. C (non-condensing)
    • Vibration
    • Operating: < 0.2 G (3 – 100Hz)
    • Non-operating, power off: < 0.4 G (3 – 100Hz)
    • Shock
    • Operating: < 2 G (10ms max.)
    • Non-operating: < 10 G (10ms max.)
    • Altitude
    • Operating: 0 to 3000m (above sea lvel)
    • Non-operating: 0 to 12000m

    EQ Filters

    • Frequency range Slope
    • HF (Low Pass): 20kHz – 3kHz (–3dB point) 12dB/Octave
    • LF (High Pass): 15Hz – 350Hz (–3dB point) 18dB/Octave

    Performance Specification*

  • Microphone Amplifier Performance

    • Gain
    • Continously variable from +20dB to +70dB
    • Independently switchable 20dB Pad available
    • Input Impedance Continously variable from ≅1k2Ω to ≅10kΩ
    • Output Headroom > +26dBu at onset of clipping
    • THD + Noise (-18dBu applied, +28dB gain)
    • < 0.2% (20Hz - 20kHz)
    • With VHD, adjustable between < 0.2% and 5% (1kHz - 20kHz)
    • Frequency Response
    • 20Hz to 20kHz +0.3dB
    • 50kHz -3dB
    • 150kHz –3dB
    • Equivalent Input Noise (input terminated with 150Ω)
    • < –126dB at maximum gain
    • < –80dB at minimum gain (with Pad ‘IN’)
    • Common Mode Rejection (-10dBu applied, +30dB gain)
    • > 75dB from 50Hz to 1kHz
    • > 65dB at 10kHz

    Line Input Performance

    • Gain Continously variable from -24dB to +24dB
    • Input Impedance 10KΩ
    • THD + Noise (-24dBu applied, +0dB gain) < 0.05% from 20Hz to 20kHz
    • -3dB at 50kHz
    • Frequency Response 20Hz to 20kHz +0.1dB from 20Hz to 20kHz
    • 50kHz –3dB
    • Equivalent Input Noise (Input terminated with 150Ω) -90dB

    * See User Manual for measurement conditions & references

  • Share This: