Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

MTR DI-3 Active Mono DI Box

MTR DI-3 - Active Mono DI Box

MTR DI-3 Active Mono DI Box that also eliminates hum

MTR DI-3 Active Mono DI Box

The DI-3 single channel D.I. box has a mono jack input and link out socket, a ground lift to eliminate hum loops, a three position attenuator for accurate level matching, and a balanced 600 ohm XLR output. The active electronics have a purely resistive high input impedance, and so do not colour the sound. Both models can be powered in 3 ways: by a 9 volt battery, phantom power from the desk (or an MTR PPS-48), or an external 9v regulated power supply.

MTR DI-3 Specifications

  • Freq. Res: 20Hz-20kHz ±3dB.
  • Distortion: (THD) < 0.005% at 1kHz, 0dBu
  • Output Noise:
  • In/Link Impedance: 1MOhm, jack.
  • Output Impedance: 600 Ohms balanced XLR.
  • Atten. Switch: -40, -20, 0dB.
  • Ground Switch: Lifted/connected.
  • DC Input: 9vDC, 100mA, neg. centre pin
  • Phantom Power: +18 volts DC to +48 volts DC
  • ‘Low Bat’ led: glows @ approx. 6v
  • Weight: 0.5Kg
Share This: