Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

MTR DI-2P Passive DIBox/Signal Splitter

MTR DI-2P - Passive DIBox/Signal Splitter

MTR DI-2P Passive DI Box and Signal Splitter, for use with stereo keyboards or two separate mono signals.

MTR DI-2P Passive DIBox/Signal Splitter

The DI-2 is a two channel version in the same sized box, for use with stereo keyboards or two separate mono signals. It can also be used as a balanced signal splitter by connecting a short jack-to-jack lead from the link socket of channel 1 to the input of channel 2. Channel 1's signal will then be available on both balanced XLR's, and channel 2's link socket. The attenuation switches remain working independently.

MTR DI-2P Specifications

  • Freq. Res: 20Hz-20kHz ±3dB.
  • In/Link Impedance: 1MOhm, jack.
  • Output Impedance: 600 Ohms balanced XLR.
  • Atten. Switch: -40, -20, 0dB.
  • Ground Switch: Lifted/connected.
Recently Viewed
  • Palmer Audionomix Active DI Box
  • Palmer Audionomix Passive DI Box
  • Palmer PAN0 3 PASS 19" DI Box
  • Palmer PAN01PRO DI Box
  • Palmer PLDB 02 Line Driver and Booster
  • Radial BT-Pro Bluetooth DI
Recently Viewed
Share This: