Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

MTR DI-2 Active Stereo DI Box

MTR DI-2 - Active Stereo DI Box

MTR DI-2 Active Stereo DI Box can also be used as a balanced signal splitter

MTR DI-2 Active Stereo DI Box

The DI-2 is a two channel version in the same sized box, for use with stereo keyboards or two separate mono signals. It can also be used as a balanced signal splitter by connecting a short jack-to-jack lead from the link socket of channel 1 to the input of channel 2. Channel 1's signal will then be available on both balanced XLR's, and channel 2's link socket. The attenuation switches remain working independently.

MTR DI-2 Specifications

  • Freq. Res: 20Hz-20kHz ±3dB.

  • Distortion: (THD) < 0.005% at 1kHz, 0dBu

  • Output Noise:
  • In/Link Impedance: 1MOhm, jack.

  • Output Impedance: 600 Ohms balanced XLR.

  • Atten. Switch: -40, -20, 0dB.

  • Ground Switch: Lifted/connected.

  • DC Input: 9vDC, 100mA, neg. centre pin

  • Phantom Power: +18 volts DC to +48 volts DC

  • ‘Low Bat’ led: glows @ approx. 6v

  • Weight: 0.5Kg
Recently Viewed
  • MTR DI-3 Active Mono DI Box
  • MTR DI-2P Passive DIBox/Signal Splitter
  • Palmer Audionomix Active DI Box
  • Palmer Audionomix Passive DI Box
  • Palmer PAN 03 19" DI Box 4-channel active
  • Palmer PAN 04 DI Box
Recently Viewed
Share This: