Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

Quested SBC800 Low Frequency Management System

Quested SBC800 Low Frequency Management System

Quested SBC800 Low Frequency Management System has been designed to improve low frequencies found in music or film reference monitoring systems

Quested SBC800 Low Frequency Management System

Improves the low frequency response of any music or film reference monitoring system, Quested or not, stereo or surround.

Adjustable - essential control of gain and phase on LCR and LFE sections independently.

Flexible and convenient – every useful control is placed on the front panel for easy set-up and fast switching whilst working.

2 bands of equalisation to optimise performance in any environment.

800 watts of Remote Power – Is it a good idea to squeeze an amplifier into a Subwoofer cabinet and shake it 40 or 50 times a second? Quested don’t think so.

  • Pure true analogue - zero latency!
  • Left-Centre-Right Channels:
  • Adjustable crossover section – 30 to 90 Hz.
  • Independent 0-180 degrees phase adjustment.
  • Full gain control.
  • These controls allow perfect integration with other manufacturers’ main systems.
  • Individual LCR inputs on XLR.
  • Single LCR Bypass switches the outputs to full-range to A/B material without the Sub.

Low Frequency Effects Channel

  • Individual input on XLR.
  • 50-150 Hz Low Pass Filter.
  • Independent 0-180 degrees phase adjustment.
  • LFE Bypass switches the outputs to full range, for when the LFE signal has already been tailored by an external processor.
  • Polarity reverse.

2 bands of parametric equalisation to adjust LF response to suit any room.

+10dB Boost switch so mixes conform to Dolby specification when required. Boosts the LFE output, so final 5.1 masters have the required LFE headroom.

Sub Solo to monitor and check the subwoofer performance.

System Bypass Link – a 3.5mm socket on the rear panel so multiple units can respond to a single front-panel Bypass command.

800 watts into 4 ohms, with clear output level monitoring from a 6-LED display.

Two pairs of normalled binding post/banana connectors allowing the convenient use of two (X15) subwoofers when required.

Easy to partner with one or two Quested X15 subwoofers. 20-200Hz, linear drive 15” transducer with 4” voice coil for speed and clarity, housed in a rock-solid cabinet constructed from heavyweight 30mm plywood.

Share This: