Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

PMC IB1SAIII Active Monitors (Pair)

PMC IB1SAmk3 Active Monitors (Pair) - Front & Profile

PMC IB1SAIII Midfield, Self Powered Active Monitors

PMC IB1SAIII Active Monitors

PMC has extended its range of compact self-powered monitors with the 'activated' IB1S-A midfield and SB100-A subwoofer, which add 200W of amplification to the passive IB1S and SB100. The new activated monitors may be purchased off-the-shelf or by retrofitting a compact power module to the existing IB1S and SB100 speakers.

The new IB1S-A and SB100-A models add PMC's 200W DS-001 Class D power amp to the rear plate of the monitors, housed in the new vented DS-MODULE-001. The result is a monitor that offers engineers and producers the controlled handling and sheer power of active models, but in a compact, plug-and-play package that does away with the need for inconvenient cabling and physically separate power amps that take up more rack space. Designed for PMC's target market of 'highly critical professionals in medium-sized control rooms', the new activated monitors are aimed at recording, broadcast, and film and video post-production/mastering applications. The activated models will be of particular benefit in smaller studios and in Outside Broadcast vehicles, where rack space is at a premium.

Current users of passive IB1S/SB100 combinations needn't lose out as a result of this new launch. The DS-MODULE-001 may be purchased separately and retrofitted in a matter of minutes to the passive monitors and/or subwoofer by means of six bolts on the monitors' existing back panels — and retrofitted IB1S-As and SB100-As have exactly the same performance and specification as off-the-shelf models. The DS-MODULE-001 may be added to horizontally or vertically orientated speakers, allowing for maximum flexibility and ease of use with all monitors in surround arrays, including centre-channel speakers and subwoofers. The activated models are available in 100-115V or 230V versions, and audio input is via professional XLR connectors, with outputs on Neutrik® SpeakON NL4s or 4mm banana plugs.

Features

  • PMC ATL™ (Advanced Transmission Line) with 2 sections
  • 27mm Twin Chamber fabric Soft dome HF with high performance ferro-fluid cooling
  • 75mm Soft Dome mid range in isolated enclosure
  • PMC 10” / 250mm carbon fibre & Nomex™ piston driver
  • Phenomenal bass response down to 25Hz
  • Magnetic shielding available (IB1SM)
  • Matching low profile centre channel (IB1SM-C)
  • Matching SB100 subwoofer to complete a surround system
  • Film filter option: HF Roll off 1.5dB, 3dB & Flat
  • Custom speaker stands for optimising performance 840mm (33") High

PMC IB1SAIII Specifications

  • IB1S-A Type: Activated
  • Useable: freq response 25Hz-25kHz
  • Peak: SPL @ 1M 116dB
  • Sensitivity: 89dB 1W 1m
  • Impedance: 4 Ohm nominal
  • Effective line length: 2.4m 8ft
  • Drive units

    LF 240mm, 100mm

    voice coil HF 27mm soft dome

  • Crossover Frequency: 380Hz & 3.8kHz
  • Input connectors: 3 Pairs 4mm Sockets(Tri-wire or Tri-Amp)
  • Activated: DS-001
  • Distortion

    full o/p Slew rate .60 micro seconds

    Power B width 1Hz to 100Hz

  • Finish: Neo Black
  • IB1S Dimensions

    H 740mm 29.1"

    W 330mm 13.0"

    D 465mm 18.3"

  • IB1SM-C (centre channel)

    H 330mm 13.0"

    W 740mm 29.1"

    D 465mm 18.3"

  • Weight (each): 46.5kg 102.3lbs