Press Esc to close
funky junk

Europe's Largest Stockists of New and Used Professional Audio Equipment

DPA Microphones 3532-SP Stereo Mic Kit

DPA Microphones 3532-SP Stereo Mic Kit - On Stand

DPA Microphones 3532-SP stereo kit with 4041-SP Large Diaphragm Stereo Kit with 4041-SP

DPA Microphones 3532-SP Stereo Mic Kit

The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within ±0,5 dB on both frequency response and sensitivity in the microphone’s entire frequency bandwidth.

It is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses, mainly as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, the 4041-SP omni microphone can be angled to use as a natural equalizer.

What's in the box

  • 2 x 4041-SP Large Diaphragm Microphone, P48, factory-matched
  • 2 x DUA0021 Foam Windscreeen
  • 1 x UA0836 Stereo Boom with Holders
  • 1 x DYS0917 Thread Adapter for Stereo Boom
  • 2 x UA0961 Microphone Holder

DPA Microphones 3532-SP Specifications

Directional characteristics:


Principle of operation:


Cartridge type:

24 mm (1 in) condenser w. stainless steel diaphragm

Frequency range, +/- 2 dB:

20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz

Equivalent noise level, A-weighted:

Max. 8 dB(A) re. 20 µPa

Equivalent noise level, ITU-R BS.468-4:

Max 20 dB

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):

86 dB

Total Harmonic Distortion (THD):

<0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak

Dynamic range:

Typ. 118 dB

Max. SPL, peak before clipping:

134 dB

Output impedance:

<200 Ohm

Cable drive capability:

Up to 100 m (328 ft)

Power supply:

48 V Phantom power


3-pin XLR-M (Standard P48)


190 g (6.7 oz)

Capsule diameter:

24 mm (1 in)

Microphone length:

170 mm (6.69 in)

Matching tolerance (frequency response and sensitivity):

±0.5 dB (20 Hz - 20 kHz)

Phase deviation for kit:

< 5°

Share This: