Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

DPA Microphones 4006A Omni Mic

DPA Microphones 4006A Omni Mic - Front & Profile

DPA Microphones 4006A Omnidirectional Microphone is a favorite among the professionals

DPA Microphones 4006A Omni Mic

  • Neutrality
  • Versatility
  • Precision
  • Recording standard
Timeless Transparency

The versatile DPA 4006A is without doubt the most popular mic in our standard range and has rightly earned its status as a worldwide recording standard. This highly sought after omni has forged its enviable reputation over the past quarter of a century by repeatedly exhibiting its total transparency in any recording situation, and by picking up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is undeniably impressive for the vast majority of miking applications.

Renaissance Microphone

With the 4006A, engineers, broadcasters and musicians alike can achieve extremely clean, natural and precise reproduction in a variety of applications. Ideal for A-B stereo pairs for symphonic concert hall recordings, the 4006A also excels on vocals and for close-miking instruments like grand piano, guitar, double bass and percussion.

Several Tools In One

A selection of acoustic modification accessories, including nose cone and interchangeable protection grids, allows the 4006A to be acoustically transformed into different microphone versions, making it the most multifaceted mic in your collection and a tremendous value. By simply changing a grid, it is possible to gain several unique frequency responses and directional characteristics from a single mic.

DPA Microphones 4006A Specifications

Directional characteristics:

Omnidirectional

Principle of operation:

Pressure

Cartridge type:

Pre-polarized condenser

Frequency range:

10 Hz to 20 kHz

Frequency range, ± 2 dB:

10 Hz to 20 kHz

Sensitivity, nominal, ±2 dB at 250 Hz:

40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted:

Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equivalent noise level, ITU-R BS.468-4:

Typ. 27 dB (max. 29 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):

Typ. 79 dB(A)

Total Harmonic Distortion (THD):

< 1 % up to 139 dB SPL peak

Minimum load impedance:

2 kohm

Dynamic range:

Typ. 124 dB

Max. SPL, peak before clipping:

147 dB

Switchable attenuator:

0 dB / -20 dB

Output impedance:

< 200 ohm

Cable drive capability:

100 m (328 ft)

Output balance principle:

Impedance balancing with Active Drive

Common Mode Rejection Ratio (CMRR):

> 60 dB

Power supply (for full specifications):

48 V Phantom power (± 4 V)

Current consumption:

2.8 mA

Connector:

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color:

Matte black

Weight:

163 g (5.7 oz)

Diameter:

16 to 19 mm (0.63 to 0.75 in)

Capsule diameter:

16 mm (0.63 in)

Length:

170 mm (6.7 in)

Output voltage, RMS:

> 5 V

Polarity:

+V at Pin 2 for positive sound pressure

Temperature range:

-40 °C to 50 °C (-40 °F to 122 °F)

Relative Humidity (RH):

Up to 90 %

Classification:

Conforms to IEC 61672 Class I (with Near-field Grid DD0251)

Matching tolerance:

± 0.5 dB

Phase deviation for kit:

< 5°

Recently Viewed
  • DPA Microphones 4007A Omni Mic
  • Neumann AK 30 Active Microphone Capsule with Omnidirectional Characteristics
  • Neumann AK 31 Active Microphone Capsule with Omnidirectional Charcteristics
  • Neumann AK 43 Active Microphone Capsule with Wide-angle Cardioid Characteristic
  • Neumann AK 45 Active Microphone Capsule with Cardioid Characteristic
  • Neumann AK 50 Actice Microphone Capsule with a Hypercardioid Characteristic
Recently Viewed
Share This: