Press Esc to close
proaudioeurope.com

Europe's Largest Stockists of New and Used Professional Audio Equipment

Audient iD22 Audio Interface

Audient iD22 22 channel USB2 Interface and Monitoring System

Audient iD22 22 Channel USB2 Interface and Monitoring System

Audient iD22 Audio Interface

The iD22 will transform your DAW into a world-class recording system by connecting directly to your microphones, computer and monitors.

Audient iD22 provides two classic audient microphone preamplifiers, ALL NEW pristine AD/DA convertors that have been designed to deliver impeccable detail and impressive depth during both tracking & mixing. iD22 is expandable via ADAT i/o - perfect for partnering with an ASP008 for 10-ch recording [total 10-in, 12-out + headphones]. Our console-style monitor controller functionality and USB2.0 connectivity complete the ergonomic desktop package.

Features

  • 2-in, 6-out high performance 24-bit/96kHz AD/DA converters
  • 2 superb class-A mic preamplifiers & 1 discrete JFET instrument input
  • Fully balanced insert points for integrating outboard gear
  • High current headphone amplifier fed by an independant DAC
  • Main and alternative stereo outputs
  • User defined monitoring functionality with hardware control
  • USB2.0 class compliant connectivity with integrated DSP mixer

Audient iD22 Specifications

Microphone Preamplifiers :(measured to insert send)

  • MIC GAIN: -10 to +60 dB (-10dB Pad)
  • LINE GAIN: -20 to +40 dB (-10dB Pad)
  • PHANTOM POWER: 48v +/-4v @ 10mA/Channel
  • MIC EIN:
  • CMRR: >80dB @ 1kHz
  • MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad)
  • INPUT IMPEDANCE (Mic): >3kO Balanced
  • INPUT IMPEDANCE (Line): >10kO Balanced
  • FREQUENCY RESPONSE: +/-0.5dB 10Hz to 100kHz
  • CROSSTALK: < -90dBu @ 1kHz & 10kHz
  • THD+N @ 0dBu (1kHz): 0.0015% (-96dBu)
  • SNR: 96dB
  • HPF: -3dB @ 100Hz, 2nd Order (12dB/Octave)
  • XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
  • 1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)

D.I (Channel 2):(measured to insert send)

  • D.I GAIN: -16 to +54 dB (-10dB Pad)
  • MAXIMUM INPUT LEVEL: +16dBu (typical), +22dBu
  • INPUT IMPEDANCE: 1MegO Unbalanced
  • FREQUENCY RESPONSE: +/-0.5dB 10Hz to 50kHz
  • THD+N @ 0dBu (1kHz):
  • SNR: 93dB
  • 1/4” JACK: TIP (Hot) & SLEEVE (Shield)
  • INSERT SENDS (Mic Pre Out):
  • MAXIMUM OUTPUT LEVEL: +22dBu
  • OUTPUT IMPEDANCE:
  • 1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)

Power Supply:

  • 12VDC Centre Positive DC Adapter - >1.5Amps
  • Internally conditioned to provide +48VDC, +/-15VDC & low voltage rails for digital processing core & converters.
  • iD22 cannot be bus powered for quality reasons.

ADC Line Inputs (Insert Returns):(measured at optical output under AES-17)

  • MAXIMUM INPUT LEVEL: +18dBu
  • DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
  • INPUT IMPEDANCE: >10kO Balanced
  • FREQUENCY RESPONSE: +/-0.5dB 10Hz to Fs/2
  • CROSSTALK: -100dBu @ 1kHz & 10kHz
  • THD+N @ -1dBFS (1kHz):
  • THD+N @ -6dBFS (1kHz):
  • DYNAMIC RANGE: 117dB un-weighted, 120dB A-weighted
  • 1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)

DAC Outputs (1-4):(measured from optical input under AES-17)

  • MAXIMUM OUTPUT LEVEL: +18dBu
  • DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
  • OUTPUT IMPEDANCE:
  • FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
  • CROSSTALK: -110dBu @ 1kHz & 10kHz
  • THD+N @ -1dBFS (1kHz):
  • DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
  • 1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)

Headphones Output (5&6):(measured from optical input under AES-17)

  • MAXIMUM OUTPUT LEVEL: +18dBu
  • DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
  • OUTPUT IMPEDANCE:
  • FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
  • CROSSTALK: -110dBu @ 1kHz & 10kHz
  • THD+N @ -1dBFS (1kHz):
  • DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
  • MAX LEVEL INTO 30ohms: +8dBu, 0.0032%
    • THD+N, 2.75Vpk
    • Power: 250mW or Pavg 125mW
  • MAX LEVEL INTO 60ohms: +11dBu, 0.0022%
    • THD+N, 4.3Vpk
    • Power: 300mW or Pavg 150mW
  • MAX LEVEL INTO 600ohms: +17.2dBu, 0.0013%
    • THD+N, 7.94Vpk
    • Power: 105mW or Pavg 52.5mW
  • 1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)

DIGITAL i/o:

  • ADAT 8 CHANNELS 44.1 - 48kHz
  • ADAT 4 CHANNELS 88.2 - 96kHZ
  • STEREO S/PDIF 44.1 - 96kHz

USB2.0 HIGH SPEED

  • No. of INPUT CHANNELS 10 (2 Analogue, 8 Digital)
  • No. of OUTPUT CHANNELS 14 (6 Analogue, 8 Digital)

iD DSP Mixer Roundtrip (in to out) Latency:

  • 44.1 kHz 1.43ms
  • 48.0 kHz 1.31ms
  • 88.2 kHz 0.719ms
  • 96.0 kHz 0.656ms

DAW Playback Latency @ 32 Sample Buffer for Software Instrument Playback:

  • 44.1 kHz 3.166ms
  • 96.0 kHz 2.12ms

DAW Roundtrip Software Monitoring Latency @ 32 Sample Buffer (in to out):

  • 44.1 kHz 6.33ms
  • 96.0 kHz 4.24ms
Share This: