500 Series Discrete mic/line pre-amp with Pultec type EQ.
- 10 to 65 dB stepped gain
- Microphone (48v available) or line level input, and switched output attentuator
- Custom wound inductor and input/output transformers
- Fully stepped rotary switches for all EQ and gain controls for ultimate recall of settings
- Passive PULTEC type equalisation circuit for minimal phase distortion
- Low frequency shelving boost @ 30, 60, or 100 Hz
- Inductor high frequency boost @ 8, 12, or 16 KHz
- Two discrete op-amps
- Relay switching
The CARTEC PRE-Q5 is a high quality transformer based microphone preamp for the API 500 series format that incorporates a passive inductor equalizer, and a balanced output attenuator. The filter circuit is identical to our EQP-1A, but with the extra gain stage and transformers required to create a high performance preamplifier. The output transformer is followed be a stepped attenuator to allow saturation of the output transformer while controlling the output level (allowing you to really drive the Pre-Q5 without clipping the next item in your signal chain). In combination with the High/Low frequency EQ, this gives the Pre a lot of tonal variety without any complicated circuitry or added phase distortion. Just a nice simple featured Preamp with a classic vibe. The Line level switch allows all of the features of be used both during tracking and mixing. you could send pre-recorded material to the EQ section or use a combination of the EQ and transformer saturation to enhance existing pre-recorded material.
