Analog Speaker and miking simulator
Transducer - Analog Speaker and miking simulator
In studio and on stage the Transducer replaces the guitar speaker cabinet and microphone(s) so that the time and resource-intensive microphone processing of this loud sonic source is no longer necessary.
In addition the Transducer offers much more sonic flexibility and variety than a single mike and cabinet setup because it allows for varied speaker and mike simulations while allowing to retain accustomed features of individual setups (such as the ability to vary level-dependent loudspeaker characteristics and microphone distances).
Features
- Authentic sound qualities and real time response for the guitar player – in contrast to digital simulations with latencies in processing
- Independence from volume levels during performances or recording sessions
- Independence from room acoustics in recordings
- Provides for a live signal in recording quality without crosstalk from miking
- Great space and weight reduction in transport
Technical Specs
Input
- Speaker Input:1/4" Jack connection
- Impedance:8 Ohms
- Max. Input Load:100 W RMS, 200 W Peak
Outputs
- Speaker Thru:1/4" Jack connection
- Pre Simulation Out:1/4" Jack connection
- Impedanceca. 1 kOhm
Mic Level Output
- XLR, electronically balanced
- Impedance unbalanced:ca. 600 Ohms
- Impedance balanced:ca. 1,2 kOhms
- Max. Output Level:+6 dBu
- Signal to Noise Rati:o-100 dBu (A weighted)
Line Output 1
- XLR, electronically balanced
- Impedance: unbalancedca. 600 Ohms
- Impedance: balancedca. 1,2 kOhms
- Max. Output Level:+21,5 dBu
- Signal to Noise Ratio:-94 dBu (A weighted)
Line Output 2
- XLR and 1/4" TRS connection, electronically balanced
- Impedance unbalanced:ca. 600 Ohms
- Impedance balanced: ca. 1,2 kOhms
- Max. Output Level:+21,5 dBu
- Signal to Noise Ratio:-94 dBu (A weighted)
Power Supply
- Selectable Line Voltages:
- 115 V AC, 60 Hz/ 230 V AC, 50 Hz
- Power Consumption:5,2 VA
- Fuses:110 – 120 V AC: 400 mA slow blow/220 – 240 V AC: 200 mA slow blow
- Power Connector:Standard 3-prong IEC connector
Dimensions & Weight
- Height x Width x Depth:
- 88,2 mm x 482,6 mm x 270 mm/ ca. 3,4" x 19" x 10,6"
- Weight:4,8 kg/10,58 lbs
UK Customers please note that all prices are subject to 17.5% VAT